Skip to content
English - United States
Contact us
  • There are no suggestions because the search field is empty.

Trigger by Resource

Explains how the \"Trigger by Resource\" trigger works in TagoIO and how to configure trigger conditions so an Action runs when a resource meets specified criteria.

The trigger type "Trigger by Resource" allows you to execute an Action when a resource meets certain conditions. A resource can be one of the following:

- Actions - Device

For example, you can trigger an Action when a new user signs up in your RUN or when a new Device is added. That Action could, for example, push a notification to yourself.

Trigger Conditions

After setting up the device, you should set a condition that causes your Action to be executed. To do this, open the Trigger section of the Action.

:::tip

You can set multiple conditions in an Action. If at least one condition matches, the Action will be executed.

:::

Trigger panel —

1. Resource – Select a resource to be tested. 2. Tag key – The tag key of the resource to be tested. 3. Tag value – The tag value of the resource to be tested. 4. Condition – The condition to be watched.

The example above means that the action will be triggered when a Device with a tag key of tag_key and a tag value of tag_value is created.